Drivers STK-7125EVB USB Serial Converter B

Only download this driver. Posted on Oct 17, Be the first to answer. Posted on Sep 27, Be the first to answer. If your UAC User Access Control is running please confirm the installation of the driver and run the setup with administrative rights. Posted on Aug 16, Be the first to answer.

Uploader:	Fektilar
Date Added:	20 April 2017
File Size:	35.85 Mb
Operating Systems:	Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads:	11646
Price:	Free* [*Free Regsitration Required]

We bought the FTDI adapter as suggested, updated the driver for the prolific as suggested, tried to switch to Microsoft USB to Serial, only to blue screen the machine. We put a serial port sniffer on the machine and can see the data getting transmitted to the device, an Epson TM-U375 serial printer that we use all over the place. On mobile editions of Windows, such as Windows 10 Mobile, only drivers that are part of the operating system are loaded. Unlike desktop editions, it is not possible to load a driver through an external driver package. With the new in-box INF, Usbser.sys is automatically loaded if a USB-to-serial device is detected on the mobile device.

Answered on Oct 17, Posted on Nov 25, Be the first to answer. This driver was developed by Staples Adapter.

Drivers STK-7125EVB USB Serial Converter b

When the operation finishes shutdown and restart your PC in order to use the updated driver. Answer questions, earn points and help others Answer questions. Get the perfect match for your driver More than 5 million happy users. Are you a Staples Computer and Internet Expert? If your UAC User Access Control is running please confirm the installation of the driver and run the setup with administrative rights. Aug 13 This driver works on Windows 5. This driver is digitally signed. Posted on Oct 24, Be the first to answer.

Where can I find the Staples Serial to USB driver? | Yahoo Answers

It is as simple as that to install a Windows driver! Posted on Apr 18, Be the first to answer. Staples 7port hub USB 20 0 Questions. You can ada;ter look up the hardware ID and download a driver that way too. Posted on Dec 20, Be the first to answer.

Please support our project by allowing our site to show ads. Only download this driver. Answered on Sep 21, Ask Talk to Expert.

Recent Popular Answered Unanswered. Posted on Aug 24, Be the first to answer.

The archive contains version 2. Posted on Jan 11, Be the first to answer. Posted on Oct 17, Be the first to answer.

Not finding what you are looking for? Posted on Aug 16, Be the first to answer. Posted on Dec 07, Be the first to answer. Posted on Jan 04, Be the first to answer.

Staples Adapter Staples Serial On USB Port – two ways of downloading and installing the driver

Answered on May 03, Run the driver installer file from a user account with administrative rights. Posted on Sep 27, Be the first to answer. Talk to a Technician Now! The ads help us provide this software and web site to you for free.

Drivers For Serial To Usb Adapter

Description

The FT232RL USB to TTL Serial Interface Adapter provides a bridge that allows you to connect between TTL serial devices and a USB port.

PACKAGE INCLUDES:

FT232RL USB to TTL Serial Interface Adapter

KEY FEATURES OF FT232RL USB TO TTL SERIAL INTERFACE ADAPTER:

Provides bridge between TTL serial communications and USB port
Mini-B USB connector
3.3 or 5V operation is jumper selectable

This adapter is based on the FT232RL chip and provides a bridge for communicating between a typical TTL level serial communication (UART) port as found on many uCs and the USB port normally found on a computer. This is commonly required when you are programming a new board through its programming interface if it does not have a USB port.

Power

Power for this module come from the USB port.

That USB power is also made available on the header VCC pin for use in powering up the board that the module is plugged into if needed.

The board has a jumper that allows you to select between supplying 5V or 3.3V to this VCC pin. When operating at 5V, the full USB maximum current of around 500 mA is available. If operating at 3.3V, this power comes from a regulator built into the FT232RL chip and the output is limited to only 50mA.

Module Connections

The module uses a Mini-B style USB connector for connection to the PC.

The Serial TTL interface is brought out to a right angle header.

In addition to the header, the I/O from those pins along with additional I/O from the pins of the FT232RL chip are brought out to breakout points along the edge of the board. These normally aren’t needed, but do provide easy access points to support atypical applications. The breakout points also allow straight headers to be soldered in so that the module can be mounted flat on a breadboard if desired.

Hookup is straightforward. The USB end plugs into your computer USB port using a standard USB to mini-B USB cable.

On the TTL side, most applications will just use the RX and TX pins cross-connected between the FT232RL module and your device that you are trying to control. RX on module goes to TX on device and TX on module goes to RX on device. There are transmit and receive LEDs on the module that shows activity on these lines. You will also need to connect the GND pin to ground on the device.

The pin-out of the right angle header is as follows.

1 x 6 Right Angle Header

DTR = Data Terminal Ready – an output used for flow control if needed (usually not used)
RX = Serial data Receive pin, connects to TX on the device
TX = Serial data Transmit pin, connects to RX on the device
VCC = Voltage output – controlled by the jumper on the module. If the jumper is set to 5V, this will provide a 5V output at up to 500mA. If the jumper is set to 3.3V, it will provide a 3.3V output at up to 50mA.
CTS = Clear To Send – an input used for flow control if needed (usually not used)
GND = Ground . Connect to ground on the device being controlled.

A driver is needed to communicate with the device. On Windows 10, the driver loaded automatically when the board was plugged in. If you need to manually download the FT232RL driver, they can be downloaded from the following link: http://www.ftdichip.com/Drivers/VCP.htm.

Once the driver is properly installed, the device will show up in the Device Manager / USB list as ‘USB Serial Converter’. It will also show up under Device Manger / Ports (COM & LPT) as a COMx port. The picture to the right shows how it appears on our Windows 10 setup. The COM port number which is COM4 here may vary.

OUR EVALUATION RESULTS:

The program below is a simple way to exercise the device and is how we test the modules.

It uses a soft serial port on an Arduino or other MCU to echo commands sent from a computer via a USB port using a terminal program like PuTTY. Any terminal program will work. Here is the link to download PuTTYif you need it.

To hook things up connect the FT232RL TX pin to pin 10 (RX) on the Arduino and connect the FT232RL RX pin to pin 11 (TX). The FT232RL ground pin should also be connected to the Arduino ground.

If you want to also power the Arduino off the FT232RL, ensure that the jumper is set for 5V and connect the VCC pin on the FT232RL to the 5V pin on the Arduino. There should be no USB cable or external DC power connected to the Arduino if you are using this option. in our test setup, we are powering the Arduino off the USB cable plugged into it since we are going to be using the Serial Monitor window so VCC is left unconnected.

Ensure a mini-B USB cable is plugged into the FT232RL connector from the computer.

Open the terminal program and set it for 9600 baud and the COM port that the FT232RL shows up on. In the Putty window below, we are using COM4, but yours may be different.

Open the Serial Monitor window and ensure it is also set for 9600 baud.

Commands typed into the terminal window followed by a carriage return will be sent out the Mini-B USB cable to the FT232RL adapter where it is converted to serial TX/RX data and read through the SoftSerial port on the Arduino.